Mechanical & Utility Engineering

Title Fees (US $)
Advance Operation Skills for Rotating Machinery $ 3,900
Offshore Construction of Pipelines and Flatforms $ 3,900
Centrifugal Pump and Compressor Design and Performance $ 3,900
P and IDS, Pipe Sizing, Piping Layouts and Isometrics 31 $ 3,900
Pipe Stress Analysis, Expansion Joint and Support Selection $ 3,900
Combustion Techniques in Furnaces, Boilers and Other Fired Equipment $ 3,900
Pipeline Management System, Pigging Operation and Troubleshooting $ 3,900
Condition Monitoring System for Instrument and Mechanical $ 3,900
Piping Systems and Process Equipment Layout $ 3,900
Corrosion Technology and Inspection $ 4,950
API 580/581: Introduction to Risk Based Inspection (RBI) Methodologies and Practices in Refineries $ 3,900
ASME B31.3 Introduction to Process Piping Design and Canadian Regulation $ 3,900
ASME Section VIII Division 1 Design and Fabrication for Pressure Vessels $ 3,900
Bearing and Bearing Failure Analysis $ 3,900
Professional Lifting Engineering (In-Plant Cranes) $ 3,900
Pumps and Valves Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 4,950
Design and Fabrication of Storage Tanks in Accordance with API 650 $ 3,900
Bolted Flange Design and Stress Analysis (ASME/ANSI) $ 4,500
Plant Reliability Prediction, Analysis and Modeling Engineering $ 3,900
Rotating Equipment Vibration and Monitoring $ 3,500
Stage 1 and Stage 2 Industrial Hydraulics $ 3,500
Tank Farm and Tank Terminal Safety and Integrity Management $ 3,900
TEMA and HTRI - Heat Exchanger Design and Cost Saving Management $ 4,500
XTree Valves and Line Pigging $ 3,900
Applied Biostratigraphy and Sequence Stratigraphy in Oil Exploration and Development $ 4,500
Applied Cathodic Protection Engineering $ 3,900
Fire Sprinkler Systems: Design, Maintenance and Inspection $ 3,500
Fundamentals of Pump and Compressors Systems $ 3,500
Valves & Bearing $ 3,900
Piping Material Selection & Rating Classification $ 4,500
Gas Turbine Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 4,500
Heat Recovery Steam Generation Performance Analysis (HRSG) $ 3,900
HVAC System Design and Implementation - New and Retrofit $ 3,500
Alignment and Troubleshooting of Rotating Machinery $ 3,900
Introduction to Static Equipment (Valves, Pressure Vessels, Piping and Heat Exchanger) $ 3,900
Mechanical Codes $ 4,500
Mechanical Engineering Design $ 4,500
Mechanical Seals: Designs, Application, Selection, Installation, Troubleshooting and Maintenance $ 4,950
Pickling And Passivation Of Pipe Spools $ 3,900
Advanced Air Conditioning and Refrigerating Technology $ 3,900
Offshore Pipeline Installation, Repair Methods and Equipment $ 3,900
Centrifugal Pump Selection, Construction, Operation, Maintenance, Repair and Troubleshooting $ 4,500
Detailed Engineering Drawings, Codes & Standards: P&ID Reading, Interpretation & Developing $ 4,500
Pipeline and Piping Design, Installation, Operation, Inspection, Testing, Maintenance, Repair, FFS, Integrity and Rehabilitation (ASME B31 and API 579 Standards) $ 3,900
Pipeline Pigging: Technical and Operational Aspects $ 4,500
Commissioning Process for HVAC Systems and Related Components $ 4,500
Control Optimization and Tuning of Furnaces, Boilers and Steam Plants $ 4,950
Corrosion, Monitoring, Prevention and Control $ 3,900
Practical Hydraulic Systems: Operations and Troubleshooting $ 3,900
ASME B31.3 Training - Process Piping Code Design Requirements $ 3,500
ASME VIII Pressure Vessel Design, Fabrication and Testing $ 3,500
Bearing Reliability in Centrifugal Pumps $ 3,900
Pump and Valve Operation, Control, Maintenance and Troubleshooting $ 3,900
Pumps, Compressors and Fans: Selection Application and Maintenance $ 4,500
Design and Fabrication Shell-and-Tube Heat Exchangers in Accordance to Asme and Tema Codes $ 3,900
Cathodic Protection System in Oil and Gas Exploration Industry $ 3,500
Remote Leak Detection of Gases and Fluids $ 4,500
Rotating Equipment, Compressors and Pumps: Operation, Control and Troubleshooting $ 4,500
Startup and Shutdown the Plant while Handling Abnormal Conditions $ 4,500
Tank Farm Operation and Performance $ 3,500
The Layout of Piping Systems and Process Equipment $ 3,900
Diesel Engine System: Design Construction, Operation and Maintenance $ 4,500
Water Desalination Technologies and New Development $ 3,900
Valves, Valve Actuators and Valve Maintenance $ 3,900
Advanced Troubleshooting of Rotating Equipment $ 3,900
Fundamentals of Vibration Causes, Effects, Analysis and Prevention Techniques $ 3,900
Boiler Operations, Maintenance & Steam Management $ 3,900
ASME PCC-1: Pressure Boundary Bolted Flange Joint Assembly $ 3,900
Gas Turbines: Operation, Troubleshooting, Maintenance and Inspection $ 4,500
HVAC System Fundamentals Heating Ventilation and Air Conditioning $ 3,900
Industrial Boilers Operation and Troubleshooting $ 4,500
Heat Rate Audit & Analysis of Thermal Power Plants $ 4,500
Mechanical and Rotating Equipment Troubleshooting and Maintenance $ 3,900
Mechanical Engineering Essentials: Rotating and Static Equipment and Structural Integrity $ 3,500
Mechanical Shock Techniques $ 4,500
Centrifugal Compressors And Pumps (Sealing System Of Compressors Shall Be Dry Gas Seals) $ 4,500
Non Destructive Testing Inspection Technique $ 4,500
Centrifugal Pumps Principles and Operations $ 4,500
Mechanical Seal & Packing Selection, Installation, Maintenance & Troubleshooting $ 4,500
API 579 Fitness-for-Service of Piping, Vessels and Tanks $ 4,500
Piping System Design and Maintenance $ 3,900
Compressor Turbo-Expander Operation and Troubleshooting $ 4,500
Practical Pump Technology: Selection, Operation and Maintenance $ 4,500
ASME B31.4 Liquid Hydrocarbon Transportation Piping Code $ 3,900
Metallurgy and Rolling Mill Operation Program $ 3,900
Data Analysis Techniques for Engineers and Technologists $ 4,500
Pumps and Compressors, Types, Troubleshooting, Maintenance and Overhauling $ 3,900
Pumps Operation, Maintenance and Trouble Shooting $ 3,900
Root Cause Bearing Failure Analysis $ 4,950
Static and Dynamic Measurements Standards, Regulations, Equipment and Procedures $ 4,950
Diagnostics, Maintenance and Operation of Rotating Equipment $ 3,500
Water System Networking and Pumping Stations $ 3,900
Troubleshooting Mechanical Refrigeration Cycle $ 3,900
Modelling Gas Turbine, Combined Cycle and Cogeneration System Training $ 3,900
Variable Refrigerant Volume $ 3,500
Fitness-for-Service (FFS) and Materials Degradation Mechanisms of Piping and Process Plant Equipment $ 3,900
Gas and Oil Pipeline Operations $ 3,500
"Steam Turbine Repair, Maintenance And Troubleshooting " $ 4,500
Heat Exchanger Inspection Testing and Cleaning Techniques $ 4,950
Air Conditioning Systems Design, Selection, Operation and Troubleshooting $ 3,900
Integrity Management of Onshore and Offshore Pipelines $ 3,900
Materials Selection for Process Plants and Facilities $ 4,500
Modern Maintenance Technologies: Challenging Traditional Approaches in Maintenance $ 4,950
Non Destructive Testing NDT $ 3,900
Advanced Operation Skills for Rotating Machinery $ 3,900
Overall Equipment Effectiveness (OEE) $ 4,950
Advanced Piping and Plant Engineering $ 3,900
Petrochemical Plant Start-Up and Troubleshooting $ 3,900
Pipeline and Piping Inspection, Maintenance and Integrity Assessment (ASME B31 and API 579 Standards) $ 4,950
Pipeline Pigging, In-Line Inspection and Integrity Assessment: Practical and Operational Aspects (API 1163) $ 3,500
Compressed Natural Gas (CNG) for Vehicles Training $ 4,950
Compressor, Steam Turbine and Pumps Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 3,900
Piping Systems: Mechanical Design and Specification $ 3,900
Power Plant Heat Exchanger Condition Assessment $ 3,900
Coupling, Gear Boxes, Bearings and Lubrication and Mechanical Seals $ 3,900
Practical Valve Technology: Selection, Installation, Upgrading, Inspection and Troubleshooting $ 4,500
Hydraulic Tools & Fitting Certification $ 3,900
ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids $ 3,900
Asset Integrity Management in Oil and Gas Industries $ 3,900
Basic Operation and Theory of Steam and Gas Turbines Co Generation and Combined Cycle Plants $ 4,500
Pump and Compressor Technologies $ 3,900
Demystifying Cathodic Protection $ 4,950
QA/QC from Mechanical Perspective $ 4,500
Risk Based Inspection for Static Equipment $ 4,500
Rotating Equipment Fundamentals and Performance Monitoring $ 3,900
Hot oil heater package $ 4,500
Design, Performance, Operation, Maintenance and Troubleshooting of Centrifugal Compressors and Steam Turbines $ 4,500
Solar Gas Turbine Maintenance and Troubleshooting $ 3,900
Steam Boilers : Operation, Maintenance and Control System $ 3,900
Technology of Pipeline Design, Pipe Supports, Shoes, Guides and Anchors Design and Drafting $ 3,500
Diagnostics, Maintenance and Repair of Oilfield Equipment $ 4,500
Train the Trainer Rigger/Signalperson Certification $ 3,500
Troubleshooting of Pumps, Compressors and Turbines $ 4,500
Penetrant Testing (PT): Easy, Portable and Fast Detection Method $ 3,900
Turbomachinery Design and Performance $ 3,500
Familiarization of Engineering and Drawings $ 3,900
Vehicle Maintenance Management and Inspection $ 4,950
Fitness-for-Service, Remaining Life Assessment and Repair of Pressure Equipment and Piping (API-579/ASME FFS-1 and PCC-2 Standards) $ 3,900
Commissioning & Start-Up with API RP 1FSC Foundation $ 3,900
Gas Compressor and Prime Mover Configuring and Operating Theory $ 3,900
Operation and Maintenance of Rotating Pumps $ 3,900
Gear Boxes: Selection, Inspection, Maintenance, Troubleshooting and Repair $ 4,500
Heat Exchanger Operation, Maintenance and Troubleshooting $ 4,950
HVAC for Oil and Gas Industry (Onshore and Offshore) $ 3,900
HVAC Technician Program $ 3,900
Industrial Equipment: Compressors, Pumps, Motors and Variable-Speed Drive : Selection Sizing, Application $ 3,900
Analytical Prevention of Machinery Failure, Pm and Troubleshooting of Plant Rotating Equipment $ 4,500
Materials of Construction for Process Equipment and Piping Systems $ 4,500
Mechanical Equipment: Compressors, Pumps, Seals, Motors, and Variable Speed Drives $ 3,900
Mechanical Plant Inspection $ 3,500
Modern Valve Technology: Selection, Installation, Upgrading, Inspection, Maintenance, Repair and Troubleshooting $ 4,950
Advanced Boilers Combustion Design, Operation and Troubleshooting $ 3,900
Oily Water Treatment Technology $ 4,950
Certified Boiler Operation, Control, Maintenance and Troubleshooting $ 3,900
Pipeline Corrosion Management $ 4,500
Pipe Stress Analysis, Expansion Joint and Support Selection $ 4,950
Advanced Practical Centrifugal Pump $ 4,500
Control Valve Maintenance and Troubleshooting $ 3,900
Couplings and Shaft Alignment $ 4,500
Pressure Equipment and Piping: Fitness-for-Service, Remaining Life Assessment and Repair (API-579/ASME FFS-1 and PCC-2 Standards) $ 4,500
ASME B31.8 Gas Transmission and Distribution Piping Systems $ 4,500
Automotive Brake, Steering, Suspension and Gearbox Systems $ 3,500
Bearing Root Cause Failure Analysis $ 3,500
Pump Selection, Installation, Performance and Control $ 3,900
Pumps and Compressors: Predictive Maintenance and Diagnostics $ 4,500
Design and Integrity Stress Analysis of Piping Systems and Pipelines $ 4,500
API Spec. Q1 9th Edition Training and Practice $ 3,500
API-579/580/581: Risk-Based-Inspection (RBI), Fitness-for-Service (FFS) and Repair Practices of Pipelines, Piping, Vessels and Tanks in Refineries, Gas, Oil and Petrochemical Facilities Training $ 3,900
Rotating Machinery Principles and Applications $ 4,500
Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance and Troubleshooting of Valve Technology (Advanced) $ 3,900
Steam Turbine Power Plant Operation, Maintenance, and Control $ 3,900
Wind Energy Utilization $ 3,500
Vessel Traffic Management and Information System (VTMIS) $ 3,900
Water Cooling Chillers (HVAC) Training $ 3,900
Turbomachinery Maintenance and Troubleshooting $ 4,500
Vehicles Inspection for Traffic Licensing $ 4,950
HVAC Design, Operation, and Maintenance $ 3,500
Gas Turbine Applications and Economics $ 4,500
Pumps & Pumping Systems Optimization $ 3,900
Harmonics, Power Quality and Its Effects on Gas Insulated Switchgears (GIS) $ 4,500
Hydraulic Control Circuit Maintenance and Troubleshooting $ 3,900
Industrial Gas Turbine Performance Engineering $ 3,500
Ion Exchange and Its Industrial Applications (Demineralization, Condensate Polishing, Etc.) $ 4,500
Maintenance and Fault Finding of Central Air Conditioning Units and Chillers $ 4,500
Mechanical Integrity and Reliability in Refineries, Petrochemical and Process Plants $ 3,900
Mechanical Troubleshooting of Pumps and Compressors $ 4,500
Steam Systems In Ammonia Plant $ 3,900
API 521: Pressure Relieving and De-Pressuring Systems $ 3,500
Multi-Phase Pumping System for Non-Technical $ 3,900
Advanced Gas Turbine Mechanical Maintenance and Troubleshooting $ 3,900
Operation and Maintenance of Lifting Equipment $ 4,500
Centrifugal Compressors Technology $ 3,900
Optimizing Vessel Operation and Management $ 4,500
Certified Boiler Operation, Instrumentation and Control $ 4,500
Pipeline Design and Construction $ 3,500
Piping Design and Drafting for Process in Oil and Gas $ 4,950
Compressor and Turbo-Expander Operation and Troubleshooting $ 3,900
Corrosion and Cathodic Protection $ 3,900
Corrosion Control in the Refining Industry $ 4,500
Power Augmentation on Gas Turbine $ 4,500
Advanced Shutdown and Turnaround Management $ 4,500
Pressure Safety Valves - Operation, Maintenance and Inspection $ 3,900
Certified Inspectors for Vehicle and Equipment $ 4,500
ASME Boiler and Pressure Vessel Specialists Codes and Standards Training $ 4,500
Auxiliary Boilers: Operation and Troubleshooting $ 3,900
Blower and Fan Technology: Performance, Measurement & Maintenance $ 3,900
Boiler Operation, Maintenance and Water Treatment Technology (ISBI Licensing Preparation Training) $ 3,900
Pumps and Compressor and Valve Maintenance $ 3,900
Pumps and Valves Operation and Control $ 4,500
RBI and FFS of Pipeline, Piping, Vessels and Tanks (API 579-580-581) and Repair Practices $ 4,500
Design of High Pressure Vessels $ 3,900
API118 - API Test 2015/2016: Tank Entry Supervisor Certification Program (API Exam) $ 4,500
RTRP Piping System (GRE/GRV/GRP) Manufacture, Design, Installation and Inspection $ 3,900
Safety Relief Valve: Sizing, Selection, Operation, Inspection, Maintenance and Troubleshooting (PRV and POPRV/PORV) API 520/521/526/527 $ 4,500
Design, Operation, Performance, Inspection, Maintenance and Repair of Heat Exchangers $ 3,900
Design, Sizing and Equipment Selection for Thermal Fluid Systems $ 4,950
Steam Turbine Technology: Design, Operation, Control and Troubleshooting $ 4,500
Training Course on Offshore Piping $ 4,950
Digital (Intelligent) Oilfields Implementation $ 4,950
Metallurgy, Materials Selection and Corrosion $ 3,900
Understanding the Manufactured Specifications of Pressure Piping for Inspectors, Designers and Engineers $ 3,900
Failure Modes and Effects Analysis (FMEA) and Reliability Centered Maintenance $ 3,900
Vibration Analysis for Conditioning Monitoring of Rotating Machine $ 3,900
Appointed Person Crane Operator $ 3,900
Gas Turbine Condition Monitoring and Fault Diagnosis $ 4,950
Hazard and Operability Study and Hazard Identification in Oil and Gas $ 3,900
ASME BPV Code Section V: Nondestructive Examinations $ 3,900
HVAC Direct Digital Control (DDC): Practical Application and Design $ 3,500
Hydraulic Control Valves: How to Select the Right Type $ 3,900
Industrial Uses of Ionizing Radiation with emphasis on NDT $ 3,900
Laser Shaft Alignment With Optalign $ 4,950
Machinery Bearing, Lubrication and Reliability (Tribology) $ 3,500
Maintenance and Troubleshooting of Induction Heating System $ 4,500
Advanced Mechanical Maintenance $ 4,500
Mechanical Vibration Causes, Effects, Analysis and Prevention Techniques $ 3,900
Training On Hot Insulation $ 3,900
NDT Inspection Technique and Application in Refinery $ 3,900
Advanced Heavy Lifting and Transportation Techniques for Onshore and Offshore Projects $ 4,500
Operation of Process Equipment: Crude Desalter, Fired Heaters, Air Coolers, Heat Exchangers, Pumps, Compressors, Process Vessels and Valves $ 4,500
Certified Boiler Operation, Maintenance and Water Treatment Technology (ISBI License) $ 3,500
Pipeline Design Calculation (Upheaval Buckling, on Bottom Stability) $ 4,500
Piping Design, Construction and Mechanical Integrity (ASME B31.3 and API 570) $ 3,900
Compressor Design, Operation, and Maintenance $ 4,500
Corrosion and Materials Management $ 3,500
Advanced Shell and Tube Industrial Heat Exchanger: Design, Applications and Maintenance $ 4,950
Pressure Vessel Design, Fabrication, Inspection, Flaw Evaluation and Repair (ASME Section VIII, API 510 and API 579 standards) $ 7,800
Crane Operation and Inspection $ 4,500
ASME BPV Code, Section VIII, Division 2 Design and Fabrication of Pressure Vessels $ 3,900
AWS Certified Welding Inspector Exam Preparation Course $ 4,950
Certified Boiler Operation, Instrumentation & Control $ 3,900
Pumps and Compressor: Performance Operation and Evaluation $ 3,900
Reciprocating Compressors Fundamentals $ 4,500
Design of Storage Tanks, Operation and Troubleshooting Training $ 4,950
Rolling Mill Operation Level ll $ 3,900
Safety Relief Valve and Rub Disc. Inspection, Maintenance , Operation, Troubleshooting, Repair and Investigate $ 3,900
Detailed Engineering Drawings, Codes and Standards: Pandid Reading, Interpretation and Developing $ 3,900
Storage Tank Design, Construction, Inspection and Maintenance $ 4,500
Train-the Trainer for Overhead Cranes Operator-Inspector (Crane Institute of America) $ 4,950
Dry Gas Seal Operation, Maintenance, Removing, Installation and Commissioning $ 3,900
Heater-Reformer Inspection Course $ 4,500
Vibration Analysis Machinery Inspection and Evaluation - Level I $ 3,900
CHILLERS Operation & Maintenance of Chilled Water Systems $ 3,900
Gas Turbine Design and Performance $ 3,900
Heat Exchanger Design, Operation, Performance, Inspection, Maintenance and Repair $ 3,900
API Q2 Implementation and Internal Auditor Training $ 4,950
Hydraulic of Oil and Gas in Pipeline $ 3,900
In-Plant Cranes, Hoists and Lifting Devices – Types, Components, Inspection, Operation and Safety $ 3,500
Licensed High Pressure Boiler Operation Certification $ 3,900
Machinery Failure, Vibration Analysis and Predictive Maintenance $ 3,900
Mechanical Maintenance in Industrial Plants $ 4,500
Multi Effect Desalination, MED Water Desalination Method, Operation, Startup and Trouble Shooting $ 3,900
Operation, Predictive Maintenance And Troubleshooting Of Utilities $ 3,900
Cathodic Protection Systems: Design, Fabrication, Installation, Operation and Repair $ 3,900
Operation, Maintenance and Troubleshooting of Pumps and Compressors $ 3,900
Certified Boiler Specialist: Boiler Operation, Maintenance and Water Treatment Technology (Isbi License) $ 3,900
Pipeline Design, Analysis and Fabrication $ 3,500
Piping Vibration Analysis and Practical Engineering Solutions in Process Plants $ 3,900
Corrosion Engineering: Monitoring, Prevention and Control $ 3,900
Pressure Vessels Inspection or International Welding Inspectors $ 3,900
ASME Plant Inspection Level 1 $ 3,500
Boiler Water Treatment Technology $ 4,500
Pumps and Compressors: Performance, Curves, Testing Standards and Codes $ 3,900
Advanced Steam Injection Processes and Oil Operator $ 3,900
Safety Relief Valve Sizing, Selection, Operation, Inspection, Maintenance and Troubleshooting (PRV and POPRV/PORV): API 520/521/526/527 $ 3,900
Offshore, Subsea Pipeline Engineering $ 3,900
Effective Management of the Chemical Analysis Support: Modern Laboratory Management $ 3,900
Value Maintenance with Fieldvue Digital Controller $ 3,900
Vibration Analysis Machinery Inspection and Evaluation - Level II $ 3,900
Gas Turbine Operation and Maintenance $ 3,500
Heating, Ventilation and Air-Conditioning (HVAC) Systems: Design, Install, Maintenance and Troubleshooting $ 4,950
Pipeline Risk Assessment $ 4,950
Hydraulics and Electro Hydraulic Systems Design, Operation and Maintenance $ 3,900
Analytical Troubleshooting in Process Machinery and Pressure Vessels $ 4,950
Metallurgy and Material Selection for Mechanical Engineers $ 4,500
Asset Condition Monitoring-Mechanical $ 3,900
Metallurgy for non Metallurgists $ 4,950
Cathodic Protection with Emphasis on Painting and Coating $ 3,900
Operations and Troubleshooting of Heat Exchangers and Fired Heaters $ 4,500
Chiller Design, Installation, Maintenance and Troubleshooting $ 4,950
Pipeline Design, Inspection and Testing $ 4,500
Plant Equipment Performance and Efficiency Calculation $ 4,500
Corrosion in the Oil and Gas Industry $ 4,500
ASME Sec IX, Welding and Brazing $ 4,500
Process Optimization (Pipeline Technical Services) Training $ 4,950
Boilers, Boiler Controls and Combustion Efficiency $ 3,900
Reciprocating Gas Compressor Operations and Maintenance $ 4,500
Refinery Energy Optimizations Management $ 4,950
Design, Fabrication and Testing of ASME Viii Division 1 Pressure Vessels $ 4,500
Scaffolding Inspectors Comprehensive Training $ 3,900
Application of Standards in Boiler, Pressure Vessel and Piping Codes $ 4,500
Advanced Technology of Pipeline Design, Construction and Mechanical Integrity Workshop $ 3,900
Pressure Vessels And Storage Tanks $ 3,500
Gas Turbine Operation and Protection $ 3,500
Hot Tapping and Plugging in Petroleum Industries $ 3,900
API 580/581/ASME PCC-3: Risk-based Inspection Program, Technology and Planning Methods $ 3,900
Hydraulics Control Circuit Maintenance and Troubleshooting $ 3,900
Machinery Failure Analysis and Repair Methods $ 4,500
Mobile and Overhead Crane Inspection and Testing as per International Standard $ 3,900
Modern HVAC Operations and Troubleshooting Technology $ 3,900
Centrifugal and Reciprocating Gas Compressor: Operation, Performance, Troubleshooting $ 4,500
Operations, Applications, Performance, Maintenance and Troubleshooting of Gas Turbines $ 4,500
Centrifugal Compressors Operation and Troubleshooting $ 4,500
API 571 (Damage Mechanisms) Supplementary Certification - Preparatory Training $ 3,900
Combined Mechanical Seals and Dry Gas Seals $ 4,500
Pipeline FFS and Integrity (ASME B31 and API 579 Standard) $ 4,500
Plant Reliability: Prediction, Analysis and Modelling $ 3,500
Positive Displacement Pump Maintenance $ 4,500
Corrosion Monitoring and Control Techniques $ 4,500
CAESAR-II Advance Training on Piping Dynamic, Static & Other Special Analysis $ 3,900
ASME Section VIII Division 1 and 2 - Pressure Vessel Series $ 4,950
ASME Process Piping, Valve, Flange Classes Selection Specification Fittings and Layouts $ 4,950
Bolted Flange and Gasket Design and Stress Analysis (ASME/ANSI) $ 4,950
Refrigeration Engineering and Technology $ 3,900
Design, Installation, Maintenance and Troubleshooting of Modern Heating, Ventilation, Air-Conditioning (HVAC) and Refrigeration Systems $ 4,500
Screw Gas Compressors & Dry Gas Seals Applications $ 4,950
Design, Installation, Operation, Maintenance and Troubleshooting of Tank and Tank Farms $ 3,900
Sewage Treatment Plant and Auxiliary Equipment $ 3,900
Super Alloy Gas Turbines $ 3,900
Efficient and Safe Plant Shutdown & Turnarounds Management $ 4,500
Engineering Codes and Standards $ 3,900
CAT Engine Advanced Training $ 3,900
Gas Turbine Operation, Applications, Performance, Maintenance and Troubleshooting $ 4,500
How to Prevent Failures in HVAC System - Proven and Tested Solutions $ 3,900
HVAC Commission and Testing Training $ 3,900
ASME B31.3, API 579, API 580, API 581, API 570, & API 571: RBI, FFS, Vibration Analysis & Repair of Piping Systems & Pipelines $ 4,950
Increasing Boiler and Steam System Efficiency $ 3,500
Machinery Diagnostics and Root Cause Failure Analysis (RCFA): Machinery Failure Analysis, Prevention and Troubleshooting $ 3,900
Mechanical Design of Process Plant Equipment $ 3,900
Advanced Maintenance Management Of Utilities $ 3,900
Pumps and Compressors: Rotating and Static Equipment Design $ 4,500
Utilities and Energy Systems Design and Performance in Refineries and Petrochemical Plants $ 3,900
Mechanical Engineer for non Mechanical Engineer $ 4,500
Industrial Equipment and Turbomachinery: Pumps, Compressors, Turbines and Motors $ 3,900
Advance Operation Skills for Rotating Machinery $ 4,500
Nonmetallic Pressure Piping Systems (Fiberglass) $ 3,900
Offshore Construction of Pipelines and Flatforms $ 4,500
Centrifugal Gas Compressor (Operation, Control, Startup, Shutdown, Maintenance and Troubleshooting) $ 3,900
Process Plant Piping System Design $ 3,900
Condition Monitoring and Vibration Control of Machines/Plants $ 4,500
Condition Monitoring System for Instrument and Mechanical $ 3,900
API 580 and 581 Training - Risk-Based Inspection and Base Resource Document $ 3,900
Piping Systems and Process Equipment Layout $ 4,500
Practical Boiler Plant: Operations, Maintenance and Troubleshooting $ 4,500
ISO Vibration Certification Level II (CAT II-ISO 18436-2): Training, Exam & Certification (Mobius Institute) $ 4,500
Basic Welding Technology $ 4,950
Bearing and Bearing Failure Analysis $ 4,500
Design and Fabrication of Piping Systems and Code Requirements $ 3,900
API Lead Auditor Training (Q1 or Q2) $ 4,500
Design and Fabrication of Storage Tanks in Accordance with API 650 $ 3,900
Rotating Equipment Selection, Operation, Maintenance, Inspection and Troubleshooting $ 3,900
Rotating Equipment Vibration and Monitoring $ 4,500
Specification and Performance of Mechanical and Electrical Rotating Equipment $ 3,900
Tank and Tank Farms: Design, Installation, Operation, Maintenance and Troubleshooting $ 3,900
Application, Selection and troubleshooting of Distributed Control System (DCS) $ 3,900
Workshop Tools: Lathe, Cutting, Grinding, Milling and Drilling $ 4,500
XTree Valves and Line Pigging $ 4,500
Turbine Technology: Performance, Operation, Control, Troubleshooting and Maintenance $ 4,500
Applied Biostratigraphy and Sequence Stratigraphy in Oil Exploration and Development $ 3,900
Valve Selection and Maintenance $ 3,900
Precision Maintenance & Defect Elimination $ 4,500
Fault Diagnosis and Failure Prevention $ 3,900
Gas Pipelines Operation and Maintenance $ 3,900
Piping Material Selection & Rating Classification $ 3,900
Heat Exchanger Types, Applications, Design, Operation and Maintenance $ 3,900
Heat Recovery Steam Generation Performance Analysis (HRSG) $ 4,500
HVAC Industrial/Commercial Units - Design and Applications $ 3,900
Intelligent Pigging and Mechanical Cleaning of Offshore and Onshore Pipelines $ 3,500
Introduction to Static Equipment (Valves, Pressure Vessels, Piping and Heat Exchanger) $ 3,900
Mechanical and Rotating Equipment Troubleshooting and Maintenance $ 4,500
Mechanical Rotating Equipment: Operation, Maintenance, Inspection $ 4,500
Mechanical Seals: Designs, Application, Selection, Installation, Troubleshooting and Maintenance $ 3,900
Pickling And Passivation Of Pipe Spools $ 4,500
New Development of Water Desalination Technologies $ 4,500
Centrifugal Pump and Compressor Design and Performance $ 4,500
P and IDS, Pipe Sizing, Piping Layouts and Isometrics 31 $ 3,500
Pipe Stress Analysis, Expansion Joint and Support Selection $ 3,900
Pipeline Pigging: Technical and Operational Aspects $ 3,900
Commissioning Process for HVAC Systems and Related Components $ 4,500
Piping Stress Analysis and Design of Pipe Supports $ 4,500
Compressor Operation, Maintenance and Troubleshooting $ 3,900
Corrosion, Monitoring, Prevention and Control $ 3,900
API 580/581: Introduction to Risk Based Inspection (RBI) Methodologies and Practices in Refineries $ 3,900
ASME B31.3 Introduction to Process Piping Design and Canadian Regulation $ 4,500
ASME VIII Pressure Vessel Design, Fabrication and Testing $ 3,900
Axial Compressor Design and Performance $ 4,500
Pump and Valve Operation, Control, Maintenance and Troubleshooting $ 4,500
Crane Operator Onshore/Offshore $ 4,500
Pumps and Compressors - Design, Operation, Maintenance and Troubleshooting $ 4,500
Pumps and Valves Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 3,900
Cathodic Protection System in Oil and Gas Exploration Industry $ 4,500
Remote Leak Detection of Gases and Fluids $ 4,950
Rolling Technology of Metals and Sheets $ 3,900
Lifting plan engineering & standard mobile equipment operation & maintenance $ 4,500
Stage 1 and Stage 2 Industrial Hydraulics $ 3,900
Advanced Steam Turbines for Design, Operation and Maintenance $ 3,900
Tank Farm and Tank Terminal Safety and Integrity Management $ 4,500
TEMA and HTRI - Heat Exchanger Design and Cost Saving Management $ 3,900
Water Hammer in Pipes $ 4,950
Applied Cathodic Protection Engineering $ 4,500
Fire Sprinkler Systems: Design, Maintenance and Inspection $ 4,500
Fundamentals of Pump and Compressors Systems $ 4,500
Boiler Operations, Maintenance & Steam Management $ 4,500
"Reciprocating Compressor Maintenance and troubleshooting " $ 3,900
Gas Turbines: Operation, Troubleshooting, Maintenance and Inspection $ 3,900
Heat Exchanger Fouling and Mitigation Technology $ 4,950
HVAC System Design and Implementation - New and Retrofit $ 4,500
Industrial Boilers Operation and Troubleshooting $ 3,900
Inspection and Maintenance of above Ground Storage Tanks to API Standards 620, 650 and 653 $ 4,500
Mechanical Design and Maintenance of Pressure Vessels $ 3,900
Mechanical Engineering Essentials: Rotating and Static Equipment and Structural Integrity $ 4,500
Mechanical Malfunction $ 4,500
Operations, Control, Maintenance and Troubleshooting of Pumps and Valves $ 4,500
Axial Compressor Design and Performance $ 3,900
Advanced Air Conditioning and Refrigerating Technology $ 4,500
Offshore Pipeline Installation, Repair Methods and Equipment $ 3,900
Centrifugal Pump Selection, Construction, Operation, Maintenance, Repair and Troubleshooting $ 3,900
Detailed Engineering Drawings, Codes & Standards: P&ID Reading, Interpretation & Developing $ 3,900
Pipeline and Piping Design, Installation, Operation, Inspection, Testing, Maintenance, Repair, FFS, Integrity and Rehabilitation (ASME B31 and API 579 Standards) $ 3,900
Combustion Techniques in Furnaces, Boilers and Other Fired Equipment $ 3,900
Pipeline Management System, Pigging Operation and Troubleshooting $ 4,500
Control Optimization and Tuning of Furnaces, Boilers and Steam Plants $ 4,500
Corrosion Technology and Inspection $ 3,900
Practical Hydraulic Systems: Operations and Troubleshooting $ 4,500
ASME B31.3 Training - Process Piping Code Design Requirements $ 3,900
ASME Section VIII Division 1 Design and Fabrication for Pressure Vessels $ 3,900
Bearing Reliability in Centrifugal Pumps $ 4,500
Professional Lifting Engineering (In-Plant Cranes) $ 4,950
Pumps, Compressors and Fans: Selection Application and Maintenance $ 3,900
Design and Fabrication Shell-and-Tube Heat Exchangers in Accordance to Asme and Tema Codes $ 3,900
Bolted Flange Design and Stress Analysis (ASME/ANSI) $ 3,900
Plant Reliability Prediction, Analysis and Modeling Engineering $ 3,900
Rotating Equipment, Compressors and Pumps: Operation, Control and Troubleshooting $ 3,900
Startup and Shutdown the Plant while Handling Abnormal Conditions $ 4,500
Tank Farm Operation and Performance $ 3,900
The Layout of Piping Systems and Process Equipment $ 4,500
Diesel Engine System: Design Construction, Operation and Maintenance $ 3,900
Water Desalination Technologies and New Development $ 4,500
Valves, Valve Actuators and Valve Maintenance $ 4,500
Advanced Troubleshooting of Rotating Equipment $ 4,500
Valves & Bearing $ 4,500
Fundamentals of Vibration Causes, Effects, Analysis and Prevention Techniques $ 4,500
ASME PCC-1: Pressure Boundary Bolted Flange Joint Assembly $ 4,500
Gas Turbine Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 3,900
HVAC System Fundamentals Heating Ventilation and Air Conditioning $ 3,900
Alignment and Troubleshooting of Rotating Machinery $ 4,500
Heat Rate Audit & Analysis of Thermal Power Plants $ 3,900
Mechanical Codes $ 3,900
Mechanical Design of Rotating Machinery $ 4,500
Mechanical Engineering Design $ 3,900
Mechanical Shock Techniques $ 3,900
Centrifugal Compressors And Pumps (Sealing System Of Compressors Shall Be Dry Gas Seals) $ 3,900
Modern Heating, Ventilation, Air-Conditioning (HVAC) and Refrigeration Systems: Design, Installation, Maintenance and Troubleshooting $ 3,900
Non Destructive Testing NDT $ 4,500
Centrifugal Compressor and Steam Turbine Design, Operations, Performance, Maintenance and Troubleshooting $ 3,900
Advanced Piping and Plant Engineering $ 3,900
Petrochemical Plant Start-Up and Troubleshooting $ 3,900
Pipeline and Piping Inspection, Maintenance and Integrity Assessment (ASME B31 and API 579 Standards) $ 3,900
Pipeline Pigging, In-Line Inspection and Integrity Assessment: Practical and Operational Aspects (API 1163) $ 4,500
Compressed Natural Gas (CNG) for Vehicles Training $ 3,900
Compressor, Steam Turbine and Pumps Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 3,900
Piping Systems: Mechanical Design and Specification $ 3,900
Plumbing Systems Design for Multi Residential, Commercial, Industrial and Institutional Buildings $ 4,500
Coupling, Gear Boxes, Bearings and Lubrication and Mechanical Seals $ 3,900
Practical Valve Technology: Selection, Installation, Upgrading, Inspection and Troubleshooting $ 3,900
Maintain Static Mechanical Equipment $ 4,500
ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids $ 3,500
Asset Integrity Management in Oil and Gas Industries $ 3,900
Basic Operation and Theory of Steam and Gas Turbines Co Generation and Combined Cycle Plants $ 3,500
Pump and Compressor Technologies $ 4,500
Demystifying Cathodic Protection $ 3,900
QA/QC from Mechanical Perspective $ 3,500
Risk Based Inspection for Static Equipment $ 3,900
Design, Installation, Operation, Inspection, Testing, Maintenance, Repair, FFS, Pigging, Integrity and Rehabilitation of Pipeline and Piping (ASME B31 and API 579 Standards) $ 3,900
Rotating Equipment Fundamentals and Performance Monitoring $ 4,500
Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting $ 4,500
Steam Boilers : Operation, Maintenance and Control System $ 4,500
Diagnostics, Maintenance and Repair of Oilfield Equipment $ 3,900
Train the Trainer Rigger/Signalperson Certification $ 4,500
Troubleshooting of Pumps, Compressors and Turbines $ 3,900
Penetrant Testing (PT): Easy, Portable and Fast Detection Method $ 3,900
Welding, Fabrication and Inspection of Welding Technology (AWS, ASME and API Codes) $ 3,900
Vehicle Maintenance Management and Inspection $ 3,900
Fitness-for-Service, Remaining Life Assessment and Repair of Pressure Equipment and Piping (API-579/ASME FFS-1 and PCC-2 Standards) $ 4,500
Commissioning & Start-Up with API RP 1FSC Foundation $ 3,900
Gas Compressor and Prime Mover Configuring and Operating Theory $ 4,500
Operation and Maintenance of Rotating Pumps $ 4,500
Gear Boxes: Selection, Inspection, Maintenance, Troubleshooting and Repair $ 3,900
Heat Exchanger Operation, Maintenance and Troubleshooting $ 4,500
HVAC Air System Design $ 4,500
HVAC Technician Program $ 4,500
Industrial Equipment: Compressors, Pumps, Motors and Variable-Speed Drive : Selection Sizing, Application $ 4,500
Analytical Prevention of Machinery Failure, Pm and Troubleshooting of Plant Rotating Equipment $ 3,900
Mechanical Equipment: Compressors, Pumps, Seals, Motors, and Variable Speed Drives $ 4,500
Mechanical Plant Inspection $ 3,900
Hot oil heater package $ 3,900
Special Type Turbine (Multi Stage, Condensing Type) Training $ 3,900
Modern Valve Technology: Selection, Installation, Upgrading, Inspection, Maintenance, Repair and Troubleshooting $ 3,900
Non Destructive Testing Inspection Technique $ 3,900
Certified Boiler Operation, Control, Maintenance and Troubleshooting $ 4,500
Pipeline Corrosion Management $ 3,900
Pipe Stress Analysis, Expansion Joint and Support Selection $ 3,900
Advanced Practical Centrifugal Pump $ 4,500
Piping System Design and Maintenance $ 4,500
Compressor Turbo-Expander Operation and Troubleshooting $ 3,900
Couplings and Shaft Alignment $ 3,900
Pressure Equipment and Piping: Fitness-for-Service, Remaining Life Assessment and Repair (API-579/ASME FFS-1 and PCC-2 Standards) $ 3,900
ASME B31.8 Gas Transmission and Distribution Piping Systems $ 3,900
Automotive Brake, Steering, Suspension and Gearbox Systems $ 3,900
Metallurgy and Rolling Mill Operation Program $ 3,900
Pump Selection, Installation, Performance and Control $ 3,900
Pumps and Compressors, Types, Troubleshooting, Maintenance and Overhauling $ 3,900
Data Analysis Techniques for Engineers and Technologists $ 4,500
API Spec. Q1 9th Edition Training and Practice $ 3,900
API-579/580/581: Risk-Based-Inspection (RBI), Fitness-for-Service (FFS) and Repair Practices of Pipelines, Piping, Vessels and Tanks in Refineries, Gas, Oil and Petrochemical Facilities Training $ 3,900
Root Cause Bearing Failure Analysis $ 3,500
Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance and Troubleshooting of Valve Technology (Advanced) $ 3,900
Steam Turbine Power Plant Operation, Maintenance, and Control $ 3,900
Diagnostics, Maintenance and Operation of Rotating Equipment $ 4,500
Troubleshooting Mechanical Refrigeration Cycle $ 4,500
Vessel Traffic Management and Information System (VTMIS) $ 3,900
Modelling Gas Turbine, Combined Cycle and Cogeneration System Training $ 4,500
Vehicles Inspection for Traffic Licensing $ 3,900
HVAC Design, Operation, and Maintenance $ 4,500
Gas Turbine Applications and Economics $ 3,900
"Steam Turbine Repair, Maintenance And Troubleshooting " $ 3,900
Harmonics, Power Quality and Its Effects on Gas Insulated Switchgears (GIS) $ 3,900
Heat Exchanger Inspection Testing and Cleaning Techniques $ 4,500
Hydraulic Control Circuit Maintenance and Troubleshooting $ 3,900
Industrial Gas Turbine Performance Engineering $ 4,500
Integrity Management of Onshore and Offshore Pipelines $ 3,900
Mechanical Dry Gas Seals and Coupling: Operation and Maintenance $ 3,900
Mechanical Integrity and Reliability in Refineries, Petrochemical and Process Plants $ 4,500
API 521: Pressure Relieving and De-Pressuring Systems $ 3,900
Multi-Phase Pumping System for Non-Technical $ 4,500
Centrifugal Compressors Technology $ 3,900
Optimizing Vessel Operation and Management $ 4,500
Centrifugal Pumps Principles and Operations $ 3,500
Mechanical Seal & Packing Selection, Installation, Maintenance & Troubleshooting $ 3,900
Certified Boiler Operation, Instrumentation and Control $ 3,900
API 579 Fitness-for-Service of Piping, Vessels and Tanks $ 4,500
Pipeline Design and Construction $ 3,900
Piping Design and Drafting for Process in Oil and Gas $ 3,900
Compressor and Turbo-Expander Operation and Troubleshooting $ 3,900
Corrosion Control in the Refining Industry $ 3,900
Power Augmentation on Gas Turbine $ 3,900
Practical Pump Technology: Selection, Operation and Maintenance $ 4,500
Advanced Shutdown and Turnaround Management $ 3,900
Pressure Safety Valves - Operation, Maintenance and Inspection $ 4,500
Certified Inspectors for Vehicle and Equipment $ 3,900
ASME B31.4 Liquid Hydrocarbon Transportation Piping Code $ 4,500
ASME Boiler and Pressure Vessel Specialists Codes and Standards Training $ 3,500
Auxiliary Boilers: Operation and Troubleshooting $ 4,500
Boiler Operation, Maintenance and Water Treatment Technology (ISBI Licensing Preparation Training) $ 4,500
Pumps and Compressor and Valve Maintenance $ 4,500
Pumps Operation, Maintenance and Trouble Shooting $ 4,500
RBI and FFS of Pipeline, Piping, Vessels and Tanks (API 579-580-581) and Repair Practices $ 3,900
API118 - API Test 2015/2016: Tank Entry Supervisor Certification Program (API Exam) $ 3,900
Safety Relief Valve: Sizing, Selection, Operation, Inspection, Maintenance and Troubleshooting (PRV and POPRV/PORV) API 520/521/526/527 $ 3,500
Design, Operation, Performance, Inspection, Maintenance and Repair of Heat Exchangers $ 4,500
Static and Dynamic Measurements Standards, Regulations, Equipment and Procedures $ 3,900
Design, Sizing and Equipment Selection for Thermal Fluid Systems $ 3,500
Steam Turbine Technology: Design, Operation, Control and Troubleshooting $ 3,900
Water System Networking and Pumping Stations $ 4,500
Training Course on Offshore Piping $ 3,900
Metallurgy, Materials Selection and Corrosion $ 4,950
Failure Modes and Effects Analysis (FMEA) and Reliability Centered Maintenance $ 3,900
Variable Refrigerant Volume $ 4,500
Fitness-for-Service (FFS) and Materials Degradation Mechanisms of Piping and Process Plant Equipment $ 4,500
Vibration Analysis for Conditioning Monitoring of Rotating Machine $ 3,900
Gas and Oil Pipeline Operations $ 3,900
Appointed Person Crane Operator $ 4,500
Gas Turbine Condition Monitoring and Fault Diagnosis $ 3,500
Hazard and Operability Study and Hazard Identification in Oil and Gas $ 4,500
HVAC Direct Digital Control (DDC): Practical Application and Design $ 4,500
Air Conditioning Systems Design, Selection, Operation and Troubleshooting $ 4,500
Hydraulic Control Valves: How to Select the Right Type $ 4,500
Industrial Uses of Ionizing Radiation with emphasis on NDT $ 4,500
Machinery Bearing, Lubrication and Reliability (Tribology) $ 3,900
Advanced Mechanical Maintenance $ 3,900
Modern Maintenance Technologies: Challenging Traditional Approaches in Maintenance $ 4,500
NDT Inspection Technique and Application in Refinery $ 4,500
Advanced Operation Skills for Rotating Machinery $ 3,900
Overall Equipment Effectiveness (OEE) $ 3,900
Certified Boiler Operation, Maintenance and Water Treatment Technology (ISBI License) $ 3,900
Pipeline Design Calculation (Upheaval Buckling, on Bottom Stability) $ 3,900
Piping Design, Construction and Mechanical Integrity (ASME B31.3 and API 570) $ 4,950
Compressor Design, Operation, and Maintenance $ 4,500
Advanced Shell and Tube Industrial Heat Exchanger: Design, Applications and Maintenance $ 4,500
Power Plant Heat Exchanger Condition Assessment $ 4,500
Crane Operation and Inspection $ 3,900
Hydraulic Tools & Fitting Certification $ 3,900
ASME BPV Code, Section VIII, Division 2 Design and Fabrication of Pressure Vessels $ 4,500
AWS Certified Welding Inspector Exam Preparation Course $ 3,900
Pumps and Compressor: Performance Operation and Evaluation $ 4,500
Reciprocating Compressors Fundamentals $ 3,900
Rolling Mill Operation Level ll $ 4,500
Solar Gas Turbine Maintenance and Troubleshooting $ 3,900
Design, Performance, Operation, Maintenance and Troubleshooting of Centrifugal Compressors and Steam Turbines $ 3,900
Storage Tank Design, Construction, Inspection and Maintenance $ 3,900
Detailed Engineering Drawings, Codes and Standards: Pandid Reading, Interpretation and Developing $ 4,500
Technology of Pipeline Design, Pipe Supports, Shoes, Guides and Anchors Design and Drafting $ 4,500
Train-the Trainer for Overhead Cranes Operator-Inspector (Crane Institute of America) $ 3,900
Heater-Reformer Inspection Course $ 4,500
Pressure Vessel Design, Fabrication, Inspection, Flaw Evaluation and Repair (ASME Section VIII, API 510 and API 579 standards) $ 9,000
Familiarization of Engineering and Drawings $ 4,500
Vibration Analysis Machinery Inspection and Evaluation - Level I $ 4,500
CHILLERS Operation & Maintenance of Chilled Water Systems $ 4,500
Gas Turbine Design and Performance $ 4,500
Heat Exchanger Design, Operation, Performance, Inspection, Maintenance and Repair $ 3,900
HVAC for Oil and Gas Industry (Onshore and Offshore) $ 4,500
Hydraulic of Oil and Gas in Pipeline $ 4,500
In-Plant Cranes, Hoists and Lifting Devices – Types, Components, Inspection, Operation and Safety $ 3,900
Maintenance and Fault Finding of Central Air Conditioning Units and Chillers $ 3,900
Mechanical Maintenance in Industrial Plants $ 4,500
Advanced Heavy Lifting and Transportation Techniques for Onshore and Offshore Projects $ 3,900
Operation of Process Equipment: Crude Desalter, Fired Heaters, Air Coolers, Heat Exchangers, Pumps, Compressors, Process Vessels and Valves $ 3,900
Certified Boiler Specialist: Boiler Operation, Maintenance and Water Treatment Technology (Isbi License) $ 3,900
Pipeline Design, Analysis and Fabrication $ 3,900
Corrosion and Materials Management $ 4,500
Corrosion Engineering: Monitoring, Prevention and Control $ 4,500
Pressure Vessels Inspection or International Welding Inspectors $ 4,500
ASME Plant Inspection Level 1 $ 3,900
Certified Boiler Operation, Instrumentation & Control $ 4,500
Boiler Water Treatment Technology $ 4,500
Reciprocating Gas Compressor Operations and Maintenance $ 4,500
Design of Storage Tanks, Operation and Troubleshooting Training $ 3,900
Safety Relief Valve and Rub Disc. Inspection, Maintenance , Operation, Troubleshooting, Repair and Investigate $ 4,500
Offshore, Subsea Pipeline Engineering $ 4,500
Dry Gas Seal Operation, Maintenance, Removing, Installation and Commissioning $ 4,500
Vibration Analysis Machinery Inspection and Evaluation - Level II $ 4,500
Gas Turbine Operation and Maintenance $ 3,900
API Q2 Implementation and Internal Auditor Training $ 3,900
Hydraulics and Electro Hydraulic Systems Design, Operation and Maintenance $ 4,500
Licensed High Pressure Boiler Operation Certification $ 3,900
Machinery Diagnostics and Root Cause Failure Analysis (RCFA): Machinery Failure Analysis, Prevention and Troubleshooting $ 3,900
Maintenance and Troubleshooting of Induction Heating System $ 4,500
Multi Effect Desalination, MED Water Desalination Method, Operation, Startup and Trouble Shooting $ 4,500
Operation, Predictive Maintenance And Troubleshooting Of Utilities $ 4,500
Advanced Gas Turbine Mechanical Maintenance and Troubleshooting $ 4,950
Operation and Maintenance of Lifting Equipment $ 4,500
Combined Mechanical Seals and Dry Gas Seals $ 3,900
Pipeline FFS and Integrity (ASME B31 and API 579 Standard) $ 3,900
Corrosion and Cathodic Protection $ 3,900
Corrosion Monitoring and Control Techniques $ 3,900
ASME Section VIII Division 1 and 2 - Pressure Vessel Series $ 3,900
Blower and Fan Technology: Performance, Measurement & Maintenance $ 4,500
ASME Process Piping, Valve, Flange Classes Selection Specification Fittings and Layouts $ 3,900
Bolted Flange and Gasket Design and Stress Analysis (ASME/ANSI) $ 4,500
Refrigeration Engineering and Technology $ 4,500
Design of High Pressure Vessels $ 4,500
RTRP Piping System (GRE/GRV/GRP) Manufacture, Design, Installation and Inspection $ 4,500
Super Alloy Gas Turbines $ 3,900
Digital (Intelligent) Oilfields Implementation $ 3,900
CAT Engine Advanced Training $ 4,500
Gas Turbine Operation, Applications, Performance, Maintenance and Troubleshooting $ 3,900
ASME BPV Code Section V: Nondestructive Examinations $ 4,500
Increasing Boiler and Steam System Efficiency $ 4,500
Laser Shaft Alignment With Optalign $ 3,900
Machinery Failure Analysis and Repair Methods $ 3,900
Materials of Construction for Process Equipment and Piping Systems $ 3,500
Mechanical Vibration Causes, Effects, Analysis and Prevention Techniques $ 3,900
Training On Hot Insulation $ 4,500
Chiller Design, Installation, Maintenance and Troubleshooting $ 3,900
Pipeline Design, Inspection and Testing $ 3,900
Corrosion in the Oil and Gas Industry $ 3,900
ASME Sec IX, Welding and Brazing $ 4,500
Process Optimization (Pipeline Technical Services) Training $ 3,900
Boilers, Boiler Controls and Combustion Efficiency $ 4,500
Refinery Energy Optimizations Management $ 3,900
Application of Standards in Boiler, Pressure Vessel and Piping Codes $ 3,900
Pressure Vessels And Storage Tanks $ 3,900
Gas Turbine Operation and Protection $ 4,500
Hydraulics Control Circuit Maintenance and Troubleshooting $ 3,900
Materials Selection for Process Plants and Facilities $ 3,900
Advanced Boilers Combustion Design, Operation and Troubleshooting $ 4,500
Oily Water Treatment Technology $ 3,900
Control Valve Maintenance and Troubleshooting $ 4,500
Bearing Root Cause Failure Analysis $ 3,900
Design and Integrity Stress Analysis of Piping Systems and Pipelines $ 3,900
Rotating Machinery Principles and Applications $ 3,900
Wind Energy Utilization $ 4,500
Pumps & Pumping Systems Optimization $ 3,900
Ion Exchange and Its Industrial Applications (Demineralization, Condensate Polishing, Etc.) $ 4,500
Mechanical Troubleshooting of Pumps and Compressors $ 3,500
Water Cooling Chillers (HVAC) Training $ 3,900
Steam Systems In Ammonia Plant $ 4,500
API 1169: Pipeline Inspector Certification (API Exam Preparation Training) $ 4,500
Advance Operation Skills for Rotating Machinery $ 3,900
Offshore Construction of Pipelines and Flatforms $ 3,900
Cathodic Protection Systems: Design, Fabrication, Installation, Operation and Repair $ 4,500
Operation, Maintenance and Troubleshooting of Pumps and Compressors $ 4,500
Condition Monitoring System for Instrument and Mechanical $ 4,500
Piping Systems and Process Equipment Layout $ 3,500
Piping Vibration Analysis and Practical Engineering Solutions in Process Plants $ 4,500
Bearing and Bearing Failure Analysis $ 3,900
Design and Fabrication of Storage Tanks in Accordance with API 650 $ 4,500
Advanced Steam Injection Processes and Oil Operator $ 4,500
Rotating Equipment Vibration and Monitoring $ 3,900
Safety Relief Valve Sizing, Selection, Operation, Inspection, Maintenance and Troubleshooting (PRV and POPRV/PORV): API 520/521/526/527 $ 3,900
XTree Valves and Line Pigging $ 3,900
Applied Biostratigraphy and Sequence Stratigraphy in Oil Exploration and Development $ 4,500
Effective Management of the Chemical Analysis Support: Modern Laboratory Management $ 4,950
Turbomachinery Design and Performance $ 3,900
Piping Material Selection & Rating Classification $ 4,500
Heat Recovery Steam Generation Performance Analysis (HRSG) $ 4,500
Heating, Ventilation and Air-Conditioning (HVAC) Systems: Design, Install, Maintenance and Troubleshooting $ 3,900
Pipeline Risk Assessment $ 3,500
Introduction to Static Equipment (Valves, Pressure Vessels, Piping and Heat Exchanger) $ 4,500
Mechanical Seals: Designs, Application, Selection, Installation, Troubleshooting and Maintenance $ 3,900
Metallurgy and Material Selection for Mechanical Engineers $ 4,500
Pickling And Passivation Of Pipe Spools $ 4,500
Asset Condition Monitoring-Mechanical $ 4,500
Metallurgy for non Metallurgists $ 3,900
Cathodic Protection with Emphasis on Painting and Coating $ 3,900
Operations and Troubleshooting of Heat Exchangers and Fired Heaters $ 3,900
Plant Equipment Performance and Efficiency Calculation $ 3,900
Design, Fabrication and Testing of ASME Viii Division 1 Pressure Vessels $ 3,900
Scaffolding Inspectors Comprehensive Training $ 4,500
Advanced Technology of Pipeline Design, Construction and Mechanical Integrity Workshop $ 4,500
Hot Tapping and Plugging in Petroleum Industries $ 4,500
API 580/581/ASME PCC-3: Risk-based Inspection Program, Technology and Planning Methods $ 4,500
Mobile and Overhead Crane Inspection and Testing as per International Standard $ 3,900
Centrifugal and Reciprocating Gas Compressor: Operation, Performance, Troubleshooting $ 3,900
Operations, Applications, Performance, Maintenance and Troubleshooting of Gas Turbines $ 3,900
Plant Reliability: Prediction, Analysis and Modelling $ 4,500
Pumps and Compressors: Predictive Maintenance and Diagnostics $ 3,900
Pumps and Valves Operation and Control $ 3,900
Design, Installation, Maintenance and Troubleshooting of Modern Heating, Ventilation, Air-Conditioning (HVAC) and Refrigeration Systems $ 3,500
Screw Gas Compressors & Dry Gas Seals Applications $ 3,900
Turbomachinery Maintenance and Troubleshooting $ 3,900
Understanding the Manufactured Specifications of Pressure Piping for Inspectors, Designers and Engineers $ 4,500
Efficient and Safe Plant Shutdown & Turnarounds Management $ 3,900
How to Prevent Failures in HVAC System - Proven and Tested Solutions $ 4,500
ASME B31.3, API 579, API 580, API 581, API 570, & API 571: RBI, FFS, Vibration Analysis & Repair of Piping Systems & Pipelines $ 3,900
Analytical Troubleshooting in Process Machinery and Pressure Vessels $ 4,500
Advanced Maintenance Management Of Utilities $ 4,500
Modern Valve Technology: Selection, Installation, Upgrading, Inspection, Maintenance, Repair and Troubleshooting $ 4,500
Pipe Stress Analysis, Expansion Joint and Support Selection $ 4,500
Advanced Practical Centrifugal Pump $ 3,900
Couplings and Shaft Alignment $ 4,500
Automotive Brake, Steering, Suspension and Gearbox Systems $ 3,900
Pumps and Compressors: Rotating and Static Equipment Design $ 3,900
Pumps and Compressors: Performance, Curves, Testing Standards and Codes $ 4,500
API-579/580/581: Risk-Based-Inspection (RBI), Fitness-for-Service (FFS) and Repair Practices of Pipelines, Piping, Vessels and Tanks in Refineries, Gas, Oil and Petrochemical Facilities Training $ 4,500
Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance and Troubleshooting of Valve Technology (Advanced) $ 4,500
Vessel Traffic Management and Information System (VTMIS) $ 4,950
Utilities and Energy Systems Design and Performance in Refineries and Petrochemical Plants $ 3,900
Value Maintenance with Fieldvue Digital Controller $ 4,500
HVAC Design, Operation, and Maintenance $ 3,900
Harmonics, Power Quality and Its Effects on Gas Insulated Switchgears (GIS) $ 4,950
Industrial Gas Turbine Performance Engineering $ 3,900
Machinery Failure, Vibration Analysis and Predictive Maintenance $ 3,900
Mechanical Integrity and Reliability in Refineries, Petrochemical and Process Plants $ 3,900
Modern Heating, Ventilation, Air-Conditioning (HVAC) and Refrigeration Systems: Design, Installation, Maintenance and Troubleshooting $ 4,500
Centrifugal Compressor and Steam Turbine Design, Operations, Performance, Maintenance and Troubleshooting $ 3,900
Operations, Control, Maintenance and Troubleshooting of Pumps and Valves $ 3,900
Centrifugal Gas Compressor (Operation, Control, Startup, Shutdown, Maintenance and Troubleshooting) $ 4,500
Process Plant Piping System Design $ 4,500
Commissioning Process for HVAC Systems and Related Components $ 3,900
Plumbing Systems Design for Multi Residential, Commercial, Industrial and Institutional Buildings $ 3,900
Practical Boiler Plant: Operations, Maintenance and Troubleshooting $ 3,900
Maintain Static Mechanical Equipment $ 3,900
ISO Vibration Certification Level II (CAT II-ISO 18436-2): Training, Exam & Certification (Mobius Institute) $ 3,900
API Lead Auditor Training (Q1 or Q2) $ 3,900
Design, Installation, Operation, Inspection, Testing, Maintenance, Repair, FFS, Pigging, Integrity and Rehabilitation of Pipeline and Piping (ASME B31 and API 579 Standards) $ 4,500
Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting $ 3,900
Specification and Performance of Mechanical and Electrical Rotating Equipment $ 4,500
Tank and Tank Farms: Design, Installation, Operation, Maintenance and Troubleshooting $ 3,900
Application, Selection and troubleshooting of Distributed Control System (DCS) $ 3,900
Valve Selection and Maintenance $ 3,900
Welding, Fabrication and Inspection of Welding Technology (AWS, ASME and API Codes) $ 4,500
Fault Diagnosis and Failure Prevention $ 4,500
HVAC Air System Design $ 3,900
HVAC Industrial/Commercial Units - Design and Applications $ 4,500
Mechanical Engineer for non Mechanical Engineer $ 4,500
Special Type Turbine (Multi Stage, Condensing Type) Training $ 4,500
Non Destructive Testing NDT $ 3,900
Centrifugal Pump and Compressor Design and Performance $ 3,900
P and IDS, Pipe Sizing, Piping Layouts and Isometrics 31 $ 3,900
Pipe Stress Analysis, Expansion Joint and Support Selection $ 4,500
Compressor, Steam Turbine and Pumps Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 4,500
Piping Systems: Mechanical Design and Specification $ 4,500
API 580/581: Introduction to Risk Based Inspection (RBI) Methodologies and Practices in Refineries $ 4,500
ASME B31.3 Introduction to Process Piping Design and Canadian Regulation $ 3,900
Basic Operation and Theory of Steam and Gas Turbines Co Generation and Combined Cycle Plants $ 3,900
Demystifying Cathodic Protection $ 3,500
Pumps and Valves Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 3,900
Rotating Equipment Fundamentals and Performance Monitoring $ 3,900
Hot oil heater package $ 3,900
Stage 1 and Stage 2 Industrial Hydraulics $ 3,900
Tank Farm and Tank Terminal Safety and Integrity Management $ 3,900
Diagnostics, Maintenance and Repair of Oilfield Equipment $ 4,500
TEMA and HTRI - Heat Exchanger Design and Cost Saving Management $ 4,950
Troubleshooting of Pumps, Compressors and Turbines $ 4,950
Applied Cathodic Protection Engineering $ 3,900
Fire Sprinkler Systems: Design, Maintenance and Inspection $ 3,900
Fundamentals of Pump and Compressors Systems $ 3,900
Operation and Maintenance of Rotating Pumps $ 3,900
Heat Exchanger Operation, Maintenance and Troubleshooting $ 3,900
HVAC System Design and Implementation - New and Retrofit $ 3,900
Analytical Prevention of Machinery Failure, Pm and Troubleshooting of Plant Rotating Equipment $ 3,900
Mechanical Plant Inspection $ 4,500
API 521: Pressure Relieving and De-Pressuring Systems $ 3,900
Non Destructive Testing Inspection Technique $ 4,500
Centrifugal Compressors Technology $ 4,500
Optimizing Vessel Operation and Management $ 3,900
Centrifugal Pump Selection, Construction, Operation, Maintenance, Repair and Troubleshooting $ 3,900
Detailed Engineering Drawings, Codes & Standards: P&ID Reading, Interpretation & Developing $ 3,900
Pipeline and Piping Design, Installation, Operation, Inspection, Testing, Maintenance, Repair, FFS, Integrity and Rehabilitation (ASME B31 and API 579 Standards) $ 4,500
Piping System Design and Maintenance $ 3,900
Compressor Turbo-Expander Operation and Troubleshooting $ 3,900
Power Augmentation on Gas Turbine $ 3,900
Practical Hydraulic Systems: Operations and Troubleshooting $ 3,900
Certified Inspectors for Vehicle and Equipment $ 3,900
ASME B31.3 Training - Process Piping Code Design Requirements $ 4,500
Metallurgy and Rolling Mill Operation Program $ 4,500
Pump Selection, Installation, Performance and Control $ 4,500
Pumps and Compressors, Types, Troubleshooting, Maintenance and Overhauling $ 4,500
Data Analysis Techniques for Engineers and Technologists $ 3,900
Pumps, Compressors and Fans: Selection Application and Maintenance $ 3,900
Root Cause Bearing Failure Analysis $ 3,900
Safety Relief Valve: Sizing, Selection, Operation, Inspection, Maintenance and Troubleshooting (PRV and POPRV/PORV) API 520/521/526/527 $ 3,900
Design, Operation, Performance, Inspection, Maintenance and Repair of Heat Exchangers $ 3,900
Startup and Shutdown the Plant while Handling Abnormal Conditions $ 3,900
Tank Farm Operation and Performance $ 4,500
Diagnostics, Maintenance and Operation of Rotating Equipment $ 3,900
The Layout of Piping Systems and Process Equipment $ 3,900
Troubleshooting Mechanical Refrigeration Cycle $ 3,900
Modelling Gas Turbine, Combined Cycle and Cogeneration System Training $ 3,900
Valves, Valve Actuators and Valve Maintenance $ 4,950
Failure Modes and Effects Analysis (FMEA) and Reliability Centered Maintenance $ 4,500
Advanced Troubleshooting of Rotating Equipment $ 3,900
Fundamentals of Vibration Causes, Effects, Analysis and Prevention Techniques $ 3,900
"Steam Turbine Repair, Maintenance And Troubleshooting " $ 3,900
Heat Exchanger Inspection Testing and Cleaning Techniques $ 3,900
HVAC Direct Digital Control (DDC): Practical Application and Design $ 3,900
HVAC System Fundamentals Heating Ventilation and Air Conditioning $ 4,950
Integrity Management of Onshore and Offshore Pipelines $ 3,900
Mechanical and Rotating Equipment Troubleshooting and Maintenance $ 3,900
Industrial Equipment and Turbomachinery: Pumps, Compressors, Turbines and Motors $ 4,500
Modern HVAC Operations and Troubleshooting Technology $ 4,500
Nonmetallic Pressure Piping Systems (Fiberglass) $ 4,500
Centrifugal Compressors Operation and Troubleshooting $ 3,900
API 571 (Damage Mechanisms) Supplementary Certification - Preparatory Training $ 3,900
Centrifugal Pumps Principles and Operations $ 3,900
Mechanical Seal & Packing Selection, Installation, Maintenance & Troubleshooting $ 3,900
API 579 Fitness-for-Service of Piping, Vessels and Tanks $ 3,900
Condition Monitoring and Vibration Control of Machines/Plants $ 3,900
API 580 and 581 Training - Risk-Based Inspection and Base Resource Document $ 3,900
Positive Displacement Pump Maintenance $ 3,500
Practical Pump Technology: Selection, Operation and Maintenance $ 3,900
CAESAR-II Advance Training on Piping Dynamic, Static & Other Special Analysis $ 3,900
ASME B31.4 Liquid Hydrocarbon Transportation Piping Code $ 3,900
Basic Welding Technology $ 3,500
Design and Fabrication of Piping Systems and Code Requirements $ 3,900
Pumps Operation, Maintenance and Trouble Shooting $ 3,900
Rotating Equipment Selection, Operation, Maintenance, Inspection and Troubleshooting $ 4,500
Sewage Treatment Plant and Auxiliary Equipment $ 4,500
Design, Installation, Operation, Maintenance and Troubleshooting of Tank and Tank Farms $ 3,900
Static and Dynamic Measurements Standards, Regulations, Equipment and Procedures $ 4,500
Workshop Tools: Lathe, Cutting, Grinding, Milling and Drilling $ 3,900
Water System Networking and Pumping Stations $ 3,900
Turbine Technology: Performance, Operation, Control, Troubleshooting and Maintenance $ 3,900
Precision Maintenance & Defect Elimination $ 4,950
Engineering Codes and Standards $ 3,900
Variable Refrigerant Volume $ 3,900
Fitness-for-Service (FFS) and Materials Degradation Mechanisms of Piping and Process Plant Equipment $ 3,900
Gas and Oil Pipeline Operations $ 4,500
Gas Pipelines Operation and Maintenance $ 3,500
Heat Exchanger Types, Applications, Design, Operation and Maintenance $ 4,500
HVAC Commission and Testing Training $ 4,500
Air Conditioning Systems Design, Selection, Operation and Troubleshooting $ 3,900
Intelligent Pigging and Mechanical Cleaning of Offshore and Onshore Pipelines $ 3,900
Mechanical Design and Maintenance of Pressure Vessels $ 4,500
Mechanical Dry Gas Seals and Coupling: Operation and Maintenance $ 4,500
Mechanical Rotating Equipment: Operation, Maintenance, Inspection $ 3,900
Multi-Phase Pumping System for Non-Technical $ 3,900
Advanced Piping and Plant Engineering $ 4,500
Petrochemical Plant Start-Up and Troubleshooting $ 4,500
Pipeline and Piping Inspection, Maintenance and Integrity Assessment (ASME B31 and API 579 Standards) $ 3,900
Piping Design and Drafting for Process in Oil and Gas $ 4,500
Compressor and Turbo-Expander Operation and Troubleshooting $ 4,500
Practical Valve Technology: Selection, Installation, Upgrading, Inspection and Troubleshooting $ 3,900
Advanced Shutdown and Turnaround Management $ 3,900
ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids $ 3,900
Auxiliary Boilers: Operation and Troubleshooting $ 3,900
Pumps and Compressor and Valve Maintenance $ 3,900
QA/QC from Mechanical Perspective $ 3,900
API118 - API Test 2015/2016: Tank Entry Supervisor Certification Program (API Exam) $ 4,500
Steam Boilers : Operation, Maintenance and Control System $ 3,900
Design, Sizing and Equipment Selection for Thermal Fluid Systems $ 3,900
Train the Trainer Rigger/Signalperson Certification $ 3,900
Training Course on Offshore Piping $ 4,500
Metallurgy, Materials Selection and Corrosion $ 3,500
Vehicle Maintenance Management and Inspection $ 4,500
Fitness-for-Service, Remaining Life Assessment and Repair of Pressure Equipment and Piping (API-579/ASME FFS-1 and PCC-2 Standards) $ 3,900
Appointed Person Crane Operator $ 3,900
Gas Compressor and Prime Mover Configuring and Operating Theory $ 3,900
Hazard and Operability Study and Hazard Identification in Oil and Gas $ 4,950
HVAC Technician Program $ 3,900
Industrial Uses of Ionizing Radiation with emphasis on NDT $ 3,900
Maintenance and Fault Finding of Central Air Conditioning Units and Chillers $ 4,500
Advanced Mechanical Maintenance $ 4,950
Modern Maintenance Technologies: Challenging Traditional Approaches in Maintenance $ 3,900
NDT Inspection Technique and Application in Refinery $ 4,500
Cathodic Protection Systems: Design, Fabrication, Installation, Operation and Repair $ 3,900
Operation, Maintenance and Troubleshooting of Pumps and Compressors $ 3,900
Advanced Operation Skills for Rotating Machinery $ 4,500
Overall Equipment Effectiveness (OEE) $ 4,500
Certified Boiler Operation, Control, Maintenance and Troubleshooting $ 3,900
Pipeline Corrosion Management $ 3,500
Piping Design, Construction and Mechanical Integrity (ASME B31.3 and API 570) $ 3,500
Compressor Design, Operation, and Maintenance $ 3,900
Piping Vibration Analysis and Practical Engineering Solutions in Process Plants $ 3,900
Power Plant Heat Exchanger Condition Assessment $ 3,900
Pressure Equipment and Piping: Fitness-for-Service, Remaining Life Assessment and Repair (API-579/ASME FFS-1 and PCC-2 Standards) $ 3,900
Crane Operation and Inspection $ 4,500
Hydraulic Tools & Fitting Certification $ 4,500
ASME B31.8 Gas Transmission and Distribution Piping Systems $ 3,900
AWS Certified Welding Inspector Exam Preparation Course $ 4,500
Pumps and Compressor: Performance Operation and Evaluation $ 3,900
API Spec. Q1 9th Edition Training and Practice $ 4,500
Advanced Steam Injection Processes and Oil Operator $ 3,900
Rolling Mill Operation Level ll $ 3,900
Safety Relief Valve Sizing, Selection, Operation, Inspection, Maintenance and Troubleshooting (PRV and POPRV/PORV): API 520/521/526/527 $ 4,500
Solar Gas Turbine Maintenance and Troubleshooting $ 4,500
Design, Performance, Operation, Maintenance and Troubleshooting of Centrifugal Compressors and Steam Turbines $ 3,900
Steam Turbine Power Plant Operation, Maintenance, and Control $ 4,500
Detailed Engineering Drawings, Codes and Standards: Pandid Reading, Interpretation and Developing $ 3,900
Technology of Pipeline Design, Pipe Supports, Shoes, Guides and Anchors Design and Drafting $ 3,900
Train-the Trainer for Overhead Cranes Operator-Inspector (Crane Institute of America) $ 4,500
Effective Management of the Chemical Analysis Support: Modern Laboratory Management $ 3,900
Heater-Reformer Inspection Course $ 3,900
Familiarization of Engineering and Drawings $ 3,900
Vehicles Inspection for Traffic Licensing $ 4,500
CHILLERS Operation & Maintenance of Chilled Water Systems $ 3,900
Gas Turbine Applications and Economics $ 4,500
Heat Exchanger Design, Operation, Performance, Inspection, Maintenance and Repair $ 4,500
Heating, Ventilation and Air-Conditioning (HVAC) Systems: Design, Install, Maintenance and Troubleshooting $ 4,500
Pipeline Risk Assessment $ 3,900
HVAC for Oil and Gas Industry (Onshore and Offshore) $ 4,500
Hydraulic Control Circuit Maintenance and Troubleshooting $ 4,500
In-Plant Cranes, Hoists and Lifting Devices – Types, Components, Inspection, Operation and Safety $ 4,500
Mechanical Design of Rotating Machinery $ 3,900
Mechanical Maintenance in Industrial Plants $ 3,900
Metallurgy and Material Selection for Mechanical Engineers $ 3,900
Asset Condition Monitoring-Mechanical $ 3,900
Metallurgy for non Metallurgists $ 3,500
New Development of Water Desalination Technologies $ 3,900
Advanced Boilers Combustion Design, Operation and Troubleshooting $ 3,900
Oily Water Treatment Technology $ 3,900
Cathodic Protection with Emphasis on Painting and Coating $ 4,500
Operations and Troubleshooting of Heat Exchangers and Fired Heaters $ 3,900
Certified Boiler Operation, Instrumentation and Control $ 3,900
Pipeline Design and Construction $ 4,500
Piping Stress Analysis and Design of Pipe Supports $ 3,900
Compressor Operation, Maintenance and Troubleshooting $ 4,500
Control Valve Maintenance and Troubleshooting $ 3,900
Plant Equipment Performance and Efficiency Calculation $ 4,500
Corrosion Control in the Refining Industry $ 3,900
Pressure Safety Valves - Operation, Maintenance and Inspection $ 3,900
ASME Boiler and Pressure Vessel Specialists Codes and Standards Training $ 3,900
Axial Compressor Design and Performance $ 3,900
Bearing Root Cause Failure Analysis $ 4,500
Boiler Operation, Maintenance and Water Treatment Technology (ISBI Licensing Preparation Training) $ 3,900
Pumps and Compressors - Design, Operation, Maintenance and Troubleshooting $ 3,900
Crane Operator Onshore/Offshore $ 4,500
Design and Integrity Stress Analysis of Piping Systems and Pipelines $ 3,900
RBI and FFS of Pipeline, Piping, Vessels and Tanks (API 579-580-581) and Repair Practices $ 4,500
Design, Fabrication and Testing of ASME Viii Division 1 Pressure Vessels $ 4,500
Rolling Technology of Metals and Sheets $ 4,500
Lifting plan engineering & standard mobile equipment operation & maintenance $ 3,900
Rotating Machinery Principles and Applications $ 3,900
Scaffolding Inspectors Comprehensive Training $ 4,500
Steam Turbine Technology: Design, Operation, Control and Troubleshooting $ 3,900
Advanced Steam Turbines for Design, Operation and Maintenance $ 4,500
Water Hammer in Pipes $ 3,500
Wind Energy Utilization $ 3,900
Water Cooling Chillers (HVAC) Training $ 4,500
Advanced Technology of Pipeline Design, Construction and Mechanical Integrity Workshop $ 3,900
Vibration Analysis for Conditioning Monitoring of Rotating Machine $ 4,950
"Reciprocating Compressor Maintenance and troubleshooting " $ 3,900
Gas Turbine Condition Monitoring and Fault Diagnosis $ 3,900
Heat Exchanger Fouling and Mitigation Technology $ 3,500
Hot Tapping and Plugging in Petroleum Industries $ 3,900
Pumps & Pumping Systems Optimization $ 4,500
API 580/581/ASME PCC-3: Risk-based Inspection Program, Technology and Planning Methods $ 3,900
Hydraulic Control Valves: How to Select the Right Type $ 3,900
Inspection and Maintenance of above Ground Storage Tanks to API Standards 620, 650 and 653 $ 3,900
Ion Exchange and Its Industrial Applications (Demineralization, Condensate Polishing, Etc.) $ 3,900
Machinery Bearing, Lubrication and Reliability (Tribology) $ 4,500
Mechanical Malfunction $ 3,900
Mechanical Troubleshooting of Pumps and Compressors $ 3,900
Steam Systems In Ammonia Plant $ 3,900
Mobile and Overhead Crane Inspection and Testing as per International Standard $ 3,500
Centrifugal and Reciprocating Gas Compressor: Operation, Performance, Troubleshooting $ 3,900
Certified Boiler Operation, Maintenance and Water Treatment Technology (ISBI License) $ 3,900
Certified Boiler Specialist: Boiler Operation, Maintenance and Water Treatment Technology (Isbi License) $ 4,500
Pipeline Design Calculation (Upheaval Buckling, on Bottom Stability) $ 4,500
Pipeline Design, Analysis and Fabrication $ 3,900
Operations, Applications, Performance, Maintenance and Troubleshooting of Gas Turbines $ 3,900
Plant Reliability: Prediction, Analysis and Modelling $ 3,900
Advanced Shell and Tube Industrial Heat Exchanger: Design, Applications and Maintenance $ 3,900
Corrosion Engineering: Monitoring, Prevention and Control $ 3,900
Pressure Vessels Inspection or International Welding Inspectors $ 3,900
ASME BPV Code, Section VIII, Division 2 Design and Fabrication of Pressure Vessels $ 4,500
ASME Plant Inspection Level 1 $ 4,500
Boiler Water Treatment Technology $ 3,900
Reciprocating Compressors Fundamentals $ 3,900
Reciprocating Gas Compressor Operations and Maintenance $ 3,900
Design, Installation, Maintenance and Troubleshooting of Modern Heating, Ventilation, Air-Conditioning (HVAC) and Refrigeration Systems $ 3,900
Screw Gas Compressors & Dry Gas Seals Applications $ 4,500
Storage Tank Design, Construction, Inspection and Maintenance $ 3,900
Offshore, Subsea Pipeline Engineering $ 3,900
Efficient and Safe Plant Shutdown & Turnarounds Management $ 3,900
Pressure Vessel Design, Fabrication, Inspection, Flaw Evaluation and Repair (ASME Section VIII, API 510 and API 579 standards) $ 7,800
Vibration Analysis Machinery Inspection and Evaluation - Level I $ 3,900
Vibration Analysis Machinery Inspection and Evaluation - Level II $ 3,900
Gas Turbine Design and Performance $ 3,900
Gas Turbine Operation and Maintenance $ 4,500
How to Prevent Failures in HVAC System - Proven and Tested Solutions $ 3,900
ASME B31.3, API 579, API 580, API 581, API 570, & API 571: RBI, FFS, Vibration Analysis & Repair of Piping Systems & Pipelines $ 4,500
Hydraulic of Oil and Gas in Pipeline $ 3,500
Hydraulics and Electro Hydraulic Systems Design, Operation and Maintenance $ 4,500
Mechanical Design of Process Plant Equipment $ 3,900
Advanced Maintenance Management Of Utilities $ 3,900
Advanced Air Conditioning and Refrigerating Technology $ 3,900
Offshore Pipeline Installation, Repair Methods and Equipment $ 4,500
Advanced Heavy Lifting and Transportation Techniques for Onshore and Offshore Projects $ 3,900
Operation of Process Equipment: Crude Desalter, Fired Heaters, Air Coolers, Heat Exchangers, Pumps, Compressors, Process Vessels and Valves $ 4,500
Chiller Design, Installation, Maintenance and Troubleshooting $ 4,500
Pipeline Design, Inspection and Testing $ 3,900
Control Optimization and Tuning of Furnaces, Boilers and Steam Plants $ 3,900
Corrosion and Materials Management $ 3,900
Corrosion in the Oil and Gas Industry $ 3,900
ASME Sec IX, Welding and Brazing $ 3,900
Bearing Reliability in Centrifugal Pumps $ 3,900
Certified Boiler Operation, Instrumentation & Control $ 3,500
Process Optimization (Pipeline Technical Services) Training $ 4,500
Boilers, Boiler Controls and Combustion Efficiency $ 3,900
Design and Fabrication Shell-and-Tube Heat Exchangers in Accordance to Asme and Tema Codes $ 4,500
Refinery Energy Optimizations Management $ 4,500
Design of Storage Tanks, Operation and Troubleshooting Training $ 3,900
Rotating Equipment, Compressors and Pumps: Operation, Control and Troubleshooting $ 3,900
Safety Relief Valve and Rub Disc. Inspection, Maintenance , Operation, Troubleshooting, Repair and Investigate $ 3,900
Application of Standards in Boiler, Pressure Vessel and Piping Codes $ 4,500
Diesel Engine System: Design Construction, Operation and Maintenance $ 3,900
Dry Gas Seal Operation, Maintenance, Removing, Installation and Commissioning $ 3,900
Water Desalination Technologies and New Development $ 3,900
Pressure Vessels And Storage Tanks $ 4,500
ASME PCC-1: Pressure Boundary Bolted Flange Joint Assembly $ 3,900
Gas Turbine Operation and Protection $ 3,900
API Q2 Implementation and Internal Auditor Training $ 4,500
Hydraulics Control Circuit Maintenance and Troubleshooting $ 4,500
Heat Rate Audit & Analysis of Thermal Power Plants $ 4,500
Licensed High Pressure Boiler Operation Certification $ 4,500
Maintenance and Troubleshooting of Induction Heating System $ 3,900
Materials Selection for Process Plants and Facilities $ 3,900
Mechanical Shock Techniques $ 3,900
Multi Effect Desalination, MED Water Desalination Method, Operation, Startup and Trouble Shooting $ 3,900
Centrifugal Compressors And Pumps (Sealing System Of Compressors Shall Be Dry Gas Seals) $ 4,500
Operation, Predictive Maintenance And Troubleshooting Of Utilities $ 4,500
Combined Mechanical Seals and Dry Gas Seals $ 3,900
Pipeline FFS and Integrity (ASME B31 and API 579 Standard) $ 3,900
Corrosion Monitoring and Control Techniques $ 3,900
ASME Section VIII Division 1 and 2 - Pressure Vessel Series $ 3,500
ASME Process Piping, Valve, Flange Classes Selection Specification Fittings and Layouts $ 4,500
Bolted Flange and Gasket Design and Stress Analysis (ASME/ANSI) $ 3,900
Refrigeration Engineering and Technology $ 3,900
Super Alloy Gas Turbines $ 4,500
CAT Engine Advanced Training $ 3,900
Gas Turbine Operation, Applications, Performance, Maintenance and Troubleshooting $ 3,900
Increasing Boiler and Steam System Efficiency $ 3,900
Machinery Diagnostics and Root Cause Failure Analysis (RCFA): Machinery Failure Analysis, Prevention and Troubleshooting $ 4,500
Mechanical Codes $ 4,500
Pipeline Management System, Pigging Operation and Troubleshooting $ 3,900
Combustion Techniques in Furnaces, Boilers and Other Fired Equipment $ 4,500
Corrosion Technology and Inspection $ 4,500
ASME Section VIII Division 1 Design and Fabrication for Pressure Vessels $ 3,500
Professional Lifting Engineering (In-Plant Cranes) $ 3,500
Bolted Flange Design and Stress Analysis (ASME/ANSI) $ 3,900
Plant Reliability Prediction, Analysis and Modeling Engineering $ 4,500
Valves & Bearing $ 3,500
Gas Turbine Technology: Design, Operation, Control, Troubleshooting and Maintenance $ 3,900
Alignment and Troubleshooting of Rotating Machinery $ 3,900
Machinery Failure Analysis and Repair Methods $ 3,900
Machinery Failure, Vibration Analysis and Predictive Maintenance $ 4,500
Materials of Construction for Process Equipment and Piping Systems $ 3,900
API 1169: Pipeline Inspector Certification (API Exam Preparation Training) $ 3,900
Mechanical Engineering Design $ 4,500
Pipeline Pigging: Technical and Operational Aspects $ 3,900
Corrosion, Monitoring, Prevention and Control $ 4,500
ASME VIII Pressure Vessel Design, Fabrication and Testing $ 4,500
Pump and Valve Operation, Control, Maintenance and Troubleshooting $ 3,900
Cathodic Protection System in Oil and Gas Exploration Industry $ 3,900
Remote Leak Detection of Gases and Fluids $ 3,900
Boiler Operations, Maintenance & Steam Management $ 3,900
Gas Turbines: Operation, Troubleshooting, Maintenance and Inspection $ 3,900
Industrial Boilers Operation and Troubleshooting $ 3,900
Mechanical Engineering Essentials: Rotating and Static Equipment and Structural Integrity $ 3,900
Advanced Gas Turbine Mechanical Maintenance and Troubleshooting $ 3,900
Operation and Maintenance of Lifting Equipment $ 3,900
Pipeline Pigging, In-Line Inspection and Integrity Assessment: Practical and Operational Aspects (API 1163) $ 3,900
Compressed Natural Gas (CNG) for Vehicles Training $ 4,500
Corrosion and Cathodic Protection $ 4,500
Coupling, Gear Boxes, Bearings and Lubrication and Mechanical Seals $ 4,500
Asset Integrity Management in Oil and Gas Industries $ 4,500
Blower and Fan Technology: Performance, Measurement & Maintenance $ 3,900
Pump and Compressor Technologies $ 3,900
Design of High Pressure Vessels $ 3,900
Risk Based Inspection for Static Equipment $ 4,500
RTRP Piping System (GRE/GRV/GRP) Manufacture, Design, Installation and Inspection $ 3,900
Penetrant Testing (PT): Easy, Portable and Fast Detection Method $ 4,500
Digital (Intelligent) Oilfields Implementation $ 4,500
Commissioning & Start-Up with API RP 1FSC Foundation $ 4,500
Gear Boxes: Selection, Inspection, Maintenance, Troubleshooting and Repair $ 3,500
ASME BPV Code Section V: Nondestructive Examinations $ 3,900
Industrial Equipment: Compressors, Pumps, Motors and Variable-Speed Drive : Selection Sizing, Application $ 3,900
Laser Shaft Alignment With Optalign $ 3,500
Analytical Troubleshooting in Process Machinery and Pressure Vessels $ 3,900
Mechanical Equipment: Compressors, Pumps, Seals, Motors, and Variable Speed Drives $ 3,900
Mechanical Vibration Causes, Effects, Analysis and Prevention Techniques $ 4,500
Training On Hot Insulation $ 4,500
Venue List
Amsterdam, Netherlands Click for Details
Dubai, UAE Click for Details
Cairo, Egypt Click for Details
Abu Dhabi, UAE Click for Details
Istanbul, Turkey Click for Details
Kuala Lumpur, Malaysia Click for Details
Singapore Click for Details
Sharm El-Sheikh Click for Details
Doha, Qatar Click for Details
London, UK Click for Details
Manama, Bahrain Click for Details
Al-Khobar, KSA Click for Details
Riyadh, KSA Click for Details
Bangkok, Thailand Click for Details
Bali, Indonesia Click for Details
Paris, France Click for Details
New York, USA Click for Details
Roma, Italy Click for Details
Muscat, Oman Click for Details
Kuwait Click for Details
Alexandria , Egypt Click for Details
Jeddah, KSA Click for Details
Trabzon, Turkey Click for Details
Vienna Click for Details
Azerbaijan Click for Details
Madrid, Spain Click for Details
Barcelona Click for Details
Puncak indonesia Click for Details
Dammam, KSA Click for Details
Las Vegas - United States Click for Details
Live-Online Click for Details
Live Virtual Online Click for Details
Los Angeles, U.S.A Click for Details
Zurich, Switzerland Click for Details
Prague, Czech Click for Details
Munich, Germany Click for Details
Baku, Azerbaijan Click for Details
Morocco Click for Details
Jordan Click for Details
BOSNIA AND HERZEGOVINA Click for Details
Sweden Click for Details
Marbella, Spain Click for Details
Genif Click for Details
Frankfort Click for Details
Japan Click for Details
Italy , Milan Click for Details
Stockholm, Sweden Click for Details
Geneva, Switzerland Click for Details
Tunisia Click for Details
Yalova, Turkey Click for Details
Frankfurt, Germany Click for Details
Jubail, KSA Click for Details
lisbon, portugal Click for Details